Etter Art XL CRACKLE PASTE - Single Product: Structure Paste 850 g (White)
SINGLE PRODUCT: STRUCTURE PASTE
That is her.
The Etter Art XL CRACKLE PASTE is a paste for creating unique cracks (crackle). Create exciting craquelure and give your artwork special depth and three-dimensionality. The Etter Art XL CRACKLE PASTE consists of two components, primer and XL CRACKLE PASTE.
That's what she's for.
With the Etter Art XL CRACKLE PASTE you can create unique and exciting crackles that you can make in any size and density. It gives your artwork an incredible look and is particularly suitable for haptic and textural art. You can apply the XL CRACKLE PASTE up to 50 mm thick. The thicker or higher the layer, the deeper and wider its cracks.
Particularities.
With the help of the primer, making the craquelure is child’s play. In addition, the primer adheres excellently to materials such as canvas, wood, polystyrene, plastic, glass and much more. It is not suitable for materials that consist of silicone or contain silicone.
Measuring, mixing and processing the XL CRACKLE PASTE
1.) You have prepared your painting surface beforehand, i.e. it has been dusted off, degreased and is lying flat on your work surface.
2.) Prime your painting ground. For your base layer, apply the primer 1-2 mm thin.
3.) Apply the XL CRACKLE PASTE directly to the base layer (primer). So you work wet on wet. This is important as this is the only way the dried XL CRACKLE PASTE will stick to the surface. Without binding using the primer, it dissolves again.
4.) Let the XL CRACKLE PASTE and the primer dry. Depending on the layer thickness of the paste, this takes several hours. The warmer, the shorter the drying time.
You should pay attention to that.
• Best results at 18-25 °C.
• Do not store below 12 °C room temperature.
• Store dry.
• Protect from frost and heat.
• Close the container immediately after removing it.
• Clean the tool with water after use.
Login