resinRESCUE – Neue Klarheit für deinen Epoxidharz-Härter
Dein Resin-Härter hat sich mit der Zeit gelblich verfärbt? Kein Grund, ihn gleich aufzugeben! Mit resinRESCUE kannst du die Vergilbung deines Epoxidharz-Härters optisch korrigieren und ihm seine Klarheit zurückgeben.
resinRESCUE – Restore Clarity to Your Epoxy Hardener Has your epoxy hardener developed a yellowish tint over time? No need to give up on it just yet! With resinRESCUE, you can correct yellowing and restore the clarity of your epoxy hardener. What makes it special? resinRESCUE is neither a dye nor a pigment. While conventional pigments simply mask yellowing, resinRESCUE has been specially developed to counteract the yellowish tint in epoxy hardeners. This helps preserve the transparency you need for crystal-clear resin artwork. And there's more: resinRESCUE contains a built-in optical brightener for a cleaner, more brilliant appearance. At the same time, it is designed to slow down further optical degradation of the hardener. The Highlights of resinRESCUE Corrects yellowish discolouration in epoxy hardeners Preserves transparency for crystal-clear resin results Highly concentrated – just a few drops are enough Compatible with all brands of epoxy hardeners, according to the manufacturer Contains a built-in optical brightener Helps slow down further optical yellowing Easy to use – simply add directly to the hardener How to Use resinRESCUE Preparation Shake the resinRESCUE bottle thoroughly before use. Dosage and Mixing Start by adding 2–3 drops of resinRESCUE per 100 ml of epoxy hardener. Stir the hardener thoroughly or shake the container until resinRESCUE is evenly dispersed. Application The colour correction takes effect immediately. Check whether you are happy with the result. If the hardener still appears too yellow, gradually add a few more drops and mix thoroughly again. Once you have achieved the desired colour correction, you can use your hardener as usual with the corresponding resin component. Always follow the specified mixing ratio of your resin system. Good to Know Depending on how much your hardener has already yellowed, the final colour may vary: Mild to moderate yellowing: The treated hardener may have a slight blue or violet tint. Severe yellowing: More heavily yellowed hardeners may retain a greenish tint. Our Tip: For best results, use your treated hardener within 60 days. Technical Information – resinRESCUE Product Type: Additive for optical colour correction of epoxy hardeners Dosage According to Manufacturer: 0.5–1% Recommended Initial Dosage: 2–3 drops per 100 ml of hardener Effect: Immediate optical colour correction Compatibility: Suitable for all brands of epoxy hardeners, according to the manufacturer Curing Performance: According to the manufacturer, curing performance is not affected, even at higher dosages Recommended Use: Within 60 days after treatment Important Information for Safe Use Always wear suitable protective gloves when working with epoxy hardeners and ensure adequate ventilation. Follow the safety and processing instructions for your resin system as well as the safety data sheet for resinRESCUE. Ready for Renewed Clarity? Give your yellowed epoxy hardener a second chance with resinRESCUE – for transparent resin results and plenty of new creative possibilities!
Content: 50 Milliliter (€398.00 / 1000 Milliliter)